China High Quality R Series Helical Reducer Gearbox for Food Processing application of helical gearbox

Merchandise Description

Substantial Top quality R Sequence Helical Reducer Gearbox for Foods Processing

Features:
-Higher performance: 92%-ninety seven%
-Compact structure: Small offset output, two stage and three stage are in the very same box.
-High precision: the equipment is created of high-quality alloy metal forging, carbonitriding and hardening remedy, grinding procedure to make certain high precision and secure managing.
-Large interchangeability: highly modular, serial design and style, sturdy versatility and interchangeability.

Specialized parameters

Ratio 3.41-289.74
Input power .12-160KW
Output torque 61-23200N.m
Output pace five-415rpm
Mounting variety Foot mounted, flange mounted, foot and flange mounted, one-phase foot mounted, single phase flange mounted, Flange-mounted with extended bearing hub
Enter Approach Flange input(AM), shaft enter(Advertisement), inline AC motor input, or AQA servo motor
Brake Launch HF-guide release(lock in the brake launch position), HR-guide release(autom-atic braking position)
Thermistor TF(Thermistor security PTC thermisto)
TH(Thermistor safety Bimetal swotch)
Mounting Place M1, M2, M3, M4, M5, M6
Kind R17-R167
Output shaft dis. 20mm, 25mm, 30mm, 35mm, 40mm, 50mm, 60mm, 70mm, 90mm, 110mm, 120mm
Housing content HT200 substantial-strength forged iron from R37,47,fifty seven,67,seventy seven,87
Housing materials HT250 High power forged iron from R97 107,137,147,157,167,187
Warmth treatment technology carbonitriding and hardening therapy
Efficiency ninety two%-ninety seven%
Lubricant VG220
Protection Class IP55, F class

High quality Management
High quality:Insist on Enhancement,Attempt for CZPT With the advancement of equipment production indurstry,client in no way satirsfy with the current high quality of our merchandise,on the contrary,wcreate the benefit of top quality.
Top quality plan:to improve the all round amount in the field of electrical power transmission  
Top quality Look at:Ongoing Improvement , pursuit of excellence
Quality Philosophy:Good quality generates value

three. Incoming Top quality Handle
To create the AQL appropriate degree of incoming material handle, to supply the materials for the total inspection, sampling, immunity. On the acceptance of experienced merchandise to warehousing, substandard merchandise to just take return, examine, rework, rework inspection dependable for tracking poor, to check the provider to get corrective steps to prevent recurrence.

4. Approach Good quality Handle
The production site of the initial assessment, inspection and ultimate inspection, sampling according to the demands of some initiatives, judging the good quality adjust pattern found abnormal phenomenon of production, and supervise the generation office to increase, get rid of the irregular phenomenon or state

5. FQC(Ultimate QC)
Right after the producing department will total the merchandise, stand in the customer’s position on the completed product quality verification, in buy to make sure the high quality of customer anticipations and needs.

6. OQC(Outgoing QC)
Following the item sample inspection to establish the qualified, enabling storage, but when the completed item from the warehouse just before the formal supply of the items, there is a examine, this is known as the shipment inspection.Examine articles:In the warehouse storage and transfer standing to confirm, while confirming the delivery of the solution is a item inspection to figure out the certified

Certifications

packaging

FAQ

one. How to pick a gearbox which fulfills our prerequisite?

You can refer to our catalogue to select the gearbox or we can aid to pick when you offer

the specialized info of required output torque, output pace and motor parameter and many others.

 

two. What details shall we give just before positioning a acquire buy?

a) Type of the gearbox, ratio, enter and output variety, enter flange, mounting position, and motor informationetc.

b) Housing colour.

c) Acquire amount.

d) Other special needs.

 

three. What industries are your gearboxes currently being utilised?

Our gearboxes are widely utilized in the regions of textile, food processing, beverage, chemical industry,

escalator,computerized storage equipment, metallurgy, tabacco, environmental security, logistics and and many others.

 

4. Doyou promote motors?

We have secure motor suppliers who have been coperating with us for a lengthy-time. They can offer motors

with substantial quality.  

 

US $60-2,500
/ Piece
|
1 Piece

(Min. Order)

###

Application: Machinery
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Layout: Coaxial
Gear Shape: Conical – Cylindrical Gear
Step: Three-Step

###

Customization:

###

Ratio 3.41-289.74
Input power 0.12-160KW
Output torque 61-23200N.m
Output speed 5-415rpm
Mounting type Foot mounted, flange mounted, foot and flange mounted, single-stage foot mounted, single stage flange mounted, Flange-mounted with extended bearing hub
Input Method Flange input(AM), shaft input(AD), inline AC motor input, or AQA servo motor
Brake Release HF-manual release(lock in the brake release position), HR-manual release(autom-atic braking position)
Thermistor TF(Thermistor protection PTC thermisto)
TH(Thermistor protection Bimetal swotch)
Mounting Position M1, M2, M3, M4, M5, M6
Type R17-R167
Output shaft dis. 20mm, 25mm, 30mm, 35mm, 40mm, 50mm, 60mm, 70mm, 90mm, 110mm, 120mm
Housing material HT200 high-strength cast iron from R37,47,57,67,77,87
Housing material HT250 High strength cast iron from R97 107,137,147,157,167,187
Heat treatment technology carbonitriding and hardening treatment
Efficiency 92%-97%
Lubricant VG220
Protection Class IP55, F class
US $60-2,500
/ Piece
|
1 Piece

(Min. Order)

###

Application: Machinery
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Layout: Coaxial
Gear Shape: Conical – Cylindrical Gear
Step: Three-Step

###

Customization:

###

Ratio 3.41-289.74
Input power 0.12-160KW
Output torque 61-23200N.m
Output speed 5-415rpm
Mounting type Foot mounted, flange mounted, foot and flange mounted, single-stage foot mounted, single stage flange mounted, Flange-mounted with extended bearing hub
Input Method Flange input(AM), shaft input(AD), inline AC motor input, or AQA servo motor
Brake Release HF-manual release(lock in the brake release position), HR-manual release(autom-atic braking position)
Thermistor TF(Thermistor protection PTC thermisto)
TH(Thermistor protection Bimetal swotch)
Mounting Position M1, M2, M3, M4, M5, M6
Type R17-R167
Output shaft dis. 20mm, 25mm, 30mm, 35mm, 40mm, 50mm, 60mm, 70mm, 90mm, 110mm, 120mm
Housing material HT200 high-strength cast iron from R37,47,57,67,77,87
Housing material HT250 High strength cast iron from R97 107,137,147,157,167,187
Heat treatment technology carbonitriding and hardening treatment
Efficiency 92%-97%
Lubricant VG220
Protection Class IP55, F class

Why Choose a Helical Gearbox?

Choosing a helical gearbox is an important decision for any machine builder. It can help you to reduce maintenance costs, improve productivity and efficiency, and ensure that your equipment operates quietly and efficiently. In addition, it can also be compact in size and easy to install.helical gearbox

High productivity and efficiency

Compared to spur gears, helical gears have high productivity and efficiency. This is due to the fact that the helical gearbox is more effective at transferring power between right-angle configurations. Helical gears are also quieter. They also have the ability to tolerate a greater load. These gears are usually used in high-load applications, such as automotive transmission applications.
The basic features of helical gears include a slanted tooth face, a larger contact ratio, and a smoother performance. Helical gears are also less expensive than spur gears. They have more power carrying capacity, longer life, and are easier to maintain.
There are many factors that affect the efficiency of helical gearboxes. Some of them include the number of stages, reduction ratio, ambient conditions, and lubrication. They are also affected by the number of teeth.
Power loss in helical gears is mainly due to friction and heat. There are various approaches to minimize these losses. One approach is to analyse power losses using a numerical method.
Other factors that affect the efficiency of helical systems include speed, noise, and the number of teeth. The amount of power lost in gear mating is dependent on the load.

Low power consumption

Compared to other types of gearboxes, helical gearboxes have low power consumption. This is because they can tolerate more load, conduct smooth performance, and are quieter. They also require less oil changes and have a longer life span.
Helical gears have special teeth that are cut at an angle. The teeth are designed to engage gradually, rather than quickly. They can transfer power between parallel configurations and right-angle configurations.
Helical gearboxes are the most widely used gearboxes. They are also the most efficient. They can work at 98% efficiency. However, they are more expensive than spur gears. They can be packaged with oil-filled housings. They have less noise and require less maintenance. They can operate cooler, and have more torque capacity.
Helical gearboxes have two types: single and double helical gears. In the single type, the gears are perpendicular to the axis. They are usually used in automotive transmission applications. They can also be used in forward velocities. In the double type, the helical faces are next to each other.
Helical gears work at higher ratios, which increases their efficiency. They are also less noisy than spur gears. They are a good choice for applications that require high torque capacity. The basic efficiency of helical gearboxes ranges from 90% to 99.5%. They are also easier to operate and have a longer life span. They are suited to a wide range of applications.helical gearbox

Compact in size

Having a shiny new set of wheels is a nice change of pace. You get to sit in style and you get to drive it like the pro. The trick is finding the right one at the right time. Fortunately, there are plenty of companies who know how to build a high quality car that can be afforded by the average Joe. You’ll find all types of cars from sports coupes to hatchbacks. You’ll also find all types of drivers from the young professional to the seasoned veteran. You’ll also find all types of roads from main streets to back roads. There are even all types of parking spaces to choose from. With a bit of planning and some research, you’ll find the perfect fit for you and your family. You can’t help but wonder why you didn’t choose a vehicle with this many perks sooner. It’s a nice way to spend a night on the town, without having to worry about a parking fee. The next time you’re in the mood to take the family out to the country for a weekend in the great bluffs, you’ll know which ones to avoid.

Noise-free operation

Compared to spur gears, helical gears have better speed capability and quieter operation. However, helical gearboxes often have problems that stop their service. These faults result in increased productivity costs. These problems include fatigue, chipping tip, crack and missing tooth.
In this paper, we propose a novel signal processing scheme to detect gearbox faults at constant speed. The method involves the use of spectral subtraction (SS) to remove the spectral noise of a signal. This approach is widely used in speech signal processing. It is also used to estimate real-time noise information. The method was successfully applied to the analysis of gearbox faults.
The spectral subtraction technique is applied to the transmission error and to the side-band frequency feature. The side-band frequency is equal to the rotation frequency of the input shaft. A square envelope spectrum method is used to obtain the spectral feature. It was then used to obtain the corresponding fault signal. The method is then compared with experimentally measured noise data.
It is also important to note that the side-band feature is not stable in different noise levels. The optimal demodulation subband selection method is not obvious. However, the proposed method can obtain a stable amplitude value when SNR is low.
Another important factor that reduces noise is the overlap ratio. The overlap ratio is the sum of the transverse contact ratio and the face contact ratio. When the overlap ratio approaches one, the noise is minimized.

Improved performance at high speeds

Whether used in an industrial, automotive or power generation application, helical gearboxes provide a number of benefits over traditional spur gearing systems. These advantages include reduced noise, higher load capacity and smoother operation.
In an effort to reduce noise and improve performance at high speeds, Parker engineers developed a helical gearbox that runs quieter and produces 30-40% more torque than a conventionally modified gear. They also redesigned the entry and exit points of the gear tooth for increased efficiency and strength.
The high-speed helical geartrain has been tested at 5,000 hp power. The tests were performed in the High-Speed Helical Geartrain Test Facility at the NASA Glenn Research Center. The tests were conducted at four different design configurations and at multiple input shaft speeds. These tests included temperature increases from inlet to outlet, fling off temperatures, and power loss of the helical system.
The first step was to improve load distribution of the gear pair. This is done by modifying the microgeometry of each gear. In addition to modifying the microgeometry of each tooth, the length of the contact line was extended. This resulted in a higher tooth contact ratio.
Another option is to modify the straddle-mounted pin of the PGS. This is a complicated task because of spatial constraints. In order to determine whether the pin will have the desired effect, it needs to be tested in real-world tests.helical gearbox

Reduce maintenance costs

Compared to spur gears, helical gears have several advantages, such as less noise and vibration, greater load carrying capacity, and longer life. They also have a reduced maintenance cost.
Helical gears can be divided into two main types: single helical and crossed axis helicals. In the single helical type, two or three teeth connect at all times.
In crossed axis helicals, the shafts are inclined at a variety of angles. These gears are primarily used in non-perpendicular transmissions. They can have very low load carrying capacity, but they offer better strength and speed reduction than spur gears.
The double helical type has two mirrored rows of teeth that are angled. This type of gear is also known as a herringbone gear. It’s a design that’s ideal for non-perpendicular transmissions.
Helical gears are packaged in oil filled housings. They are a space saving gear reducer. They are used in automobile transmissions and other forward speeds. They are also used in industrial gearboxes.
Helical gears can be made of either solid or semi-solid materials. They can be sliced into an arbitrary number of cross sections. This allows the helix to be adjusted to suit the application.
It’s important to choose the right gear for your application. The gear’s design may include the number of teeth, lubricant type, surface treatment, and the tooth angle. It’s also important to choose the right lubricant, because it can affect the noise levels and the efficiency of the gear.
China High Quality R Series Helical Reducer Gearbox for Food Processing     application of helical gearboxChina High Quality R Series Helical Reducer Gearbox for Food Processing     application of helical gearbox
editor by czh 2022-12-22

Helical Gearbox

As one of the leading helical gearbox manufacturers, suppliers, and exporters of mechanical products, We offer helical gearboxes and many other products.

Please contact us for details.

Manufacturer supplier exporter of the helical gearbox.