Product Description
High Efficiency Coaxial Inline Servo Motor Precise Low Backlash Helical Precision Gear Head, Planetary Gear Unit
Features:
1. Using involute gear transmission, alloy steel with carbonize & quencher heat treatment, precision level
of gear grinding could reach ISO class 5, the profile and axial modification could enhance the bearing
capacity, stability of mesh and low noise.
2. With integral output shaft and bearing support for both sides of planet wheel, realizing higher precision
and higher rigidity.
3. Small backlash, the accurate CZPT can reach within 3 arcmin as clients’ request.
4. Gyration parts of the input side with dynamic balance treatment can make sure the gearbox running
steadily at high speed.
5. It can combine with any servo motor, can be designed for special combination, and easy for mounting.
(It can be specially designed to accept any type of servo motor, mounting is convenient)
6. Simple for maintenance, it doesn’t need to change the oil(grease) during the service life time.
Product photo:
Specification:
| ANG Precision Planetary Gearbox | |||
| Model | 40-220 | Type | Coaxial or Right angle |
| Ratio | 1/3 ~ 1/512 | Torque | 40-3000Nm |
| Efficiency | 98% | Input/Output shaft material | 40Cr |
| Housing material | 42CrMo | Machining precision of gears | 6 Grade |
| Gear material | 20CrMnTi | Lubricating oil | Synthetic Grease |
| Surface hardness of gears | HRC58-62 | Heat treatment | Carbonize & quencher |
| Brand of bearings | C&U, HRB | Vibration | ≤15μm |
| Brand of oil seal | SKF | Oil Temp. rise (MAX) | 40ºC |
| Noise (MAX) | 55-70 dB | Noise (MAX) | 70º |
FAQ
Q: Can you make the gearbox with customization?
A: Yes, we can customize per your request, like power, voltage, speed, shaft size, flange, terminal box, IP grade, etc.
Q: Do you provide samples?
A: Yes. Sample is available for testing.
Q: What is your MOQ?
A: It is 1pcs for the beginning of our business.
Q: What’s your lead time?
A: Standard product need 5-30days, a bit longer for customized products.
Q: Do you provide technology support?
A: Yes. Our company have design and development team, we can provide technology support if you
need.
Q: How to ship to us?
A: It is available by air, or by sea, or by train.
Q: How to pay the money?
A: T/T and L/C is preferred, with different currency, including USD, EUR, RMB, etc.
Q: How can I know the product is suitable for me?
A: >1ST confirm drawing and specification >2nd test sample >3rd start mass production.
Q: Can I come to your company to visit?
A: Yes, you are welcome to visit us at any time.
Q: How shall we contact you?
A: You can send inquiry directly, and we will respond within 24 hours.
Â
| Application: | Machinery |
|---|---|
| Function: | Change Drive Torque |
| Layout: | Coaxial or Right Angle |
| Samples: |
US$ 300/Piece
1 Piece(Min.Order) | Order Sample |
|---|
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
| Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Helical Gearbox
Depending on the helical gearbox, it can be either Crossed-axis or Inline. Basically, helical gearboxes are composed of a set of toothed gears that mesh with other toothed parts to transmit torque and speed to other parts of the machine.
Right angle helical gearboxes
Choosing the right angle gearbox can be difficult. This is because the design and specifications will depend on the type of application. The right gearbox can make or break the efficiency of the system. For example, a right angle gearbox will need to be corrosion resistant if it is used in a washdown application. It may also require special grease for use in cold temperatures.
There are many different types of right angle gearboxes. The types include worm, hypoid, and spiral bevel gearboxes. The most common are worm gearboxes. These are a great option for applications that need high torque and power. However, they are not as efficient as spur gears.
Helical gearboxes are ideal for heavy-duty industrial applications such as conveyors, blowers, and elevators. They are quiet and have better speed capabilities than spur gears. They can handle larger loads because of their gradual engagement. They are also capable of adjusting the rotation angle by 90 degrees. They are also more efficient at high speeds.
Spiral bevel gearboxes require more precision to manufacture. They are also more expensive to produce. This is because the teeth need to be drilled and shaped to fit the shafts. The gearbox needs to be designed with tight tolerances and requires basic lubrication. Its operating cycle is long.
Helical gearboxes can be used in conjunction with other gearboxes. For example, the output shaft may be a hollow shaft, or it may be designed with dual counter-rotating shafts. They can also be designed to operate in either a clockwise or counter-clockwise direction.
Right angle gearboxes are ideal for high-speed applications. They require less maintenance than other industrial components. They may require corrosion resistant plating or stainless steel shafts. If you are considering a right angle gearbox, check with a distributor to see what types of products are available. A representative will be able to help you with installation. They may also offer custom gearbox solutions to fit your needs.
A gearbox is made up of four main components. These components include the input shaft, the output shaft, the gear, and the backlash.
Crossed-axis helical gears
Normally, helical gearboxes are used to increase torque between two rotating shafts. Compared to other types of gearboxes, helical gearboxes offer greater speed and power carrying capacity. They are also quieter and smoother in operation. These gearboxes are used in many industries such as food processing, plastic, rubber, and oil industries. These gears also have the advantage of being cheaper than spur gears.
These gears are designed with special teeth that are positioned at an angle to the face of the gear. As they rotate, the teeth engage gradually. They have longer teeth, which allow them to carry heavy loads. The contact area also increases as the gears rotate.
A cross axis helical gearbox is one of the most common types of gearboxes. This gearbox has an advantage over spur gears, since it uses bearings to support the thrust load. It can also adjust the rotation angle by 90 degrees. These gearboxes are typically used to drive automobile oil pump/distribution shafts. They are also used to drive blowers. They have a large thrust force.
The cross axis helical gearbox has the advantage of using bearings to support the thrust load. However, it also has the disadvantage of using a large amount of bearings. In addition, these gears are not suitable for speed reduction beyond 1:2.
Thermoplastic crossed axis helical gears are a convenient solution for high volume applications. These gears are self-locking and offer high torque. These gears are also very durable. They are also available in a variety of configurations and sizes. They are used in a wide range of industries, including the textile industry. The output torque of these gears is also very high.
Crossed helical gears are also used to transmit motion and power between perpendicular but non-intersecting shafts. To achieve this, two mating helical gears must have the same helix angle, pressure angle, and normal pitch. They should also be mounted on perpendicular but non-intersecting, parallel shafts.
To calculate the real radial pitch of a gear, the angle of cut is measured. The gear teeth are then cut at an angle to the face of the gear. The helix angle is also measured.
Inline helical gears
Unlike spur gears, helical gears have a large surface contact and are characterized by low noise and large torque. Moreover, helical gears also have a high degree of meshing performance. They are also compact and durable.
As the name suggests, helical gears are produced using hard steel teeth. They are also hobbed to ensure smooth running and accurate surface finish. In addition, all gearing is ground for increased efficiency.
Inline helical gearboxes are used in a number of applications, including waste water systems and in solvent extraction. They are also used in industries like power plants and food & tobacco. They have good efficiency and are low in cost. They also have interchangeability and high durability. They can be installed in a single piece aluminum alloy housing. They can also be foot mounted or flange mounted. They are available in single stage and three stage constructions.
Helical gearboxes are typically used in high-load applications, such as in cement and waste water systems. They are also suitable for industrial applications, including in manufacturing. They are also used in applications where there is a large speed variation range. They are suitable for a wide temperature range, from -10 degC to 40 degC.
A helical gearbox has a high degree of interchangeability, and can be installed with a wide range of motors. They are also available in flame proof versions. They can also be supplied with an integrated output flange. They have standard IEC inputs, making them easy to install and operate. They also have a removable inspection cover, which allows periodic inspection of gearing. They can also be supplied with integral mounting bases.
The transmission ratio of helical gearboxes is finely graded to meet different working conditions. They also have an output torque that ranges from 1.4-250. They are also available in a modular model, which allows them to be produced in an economical manner. They can also be installed with a standard IEC input, which makes them easy to fit with any IEC motor. They also have a permanent nameplate, which indicates the ratio and the output torque.
Helix angle
Using a helical gearbox is a more economical and efficient way of creating a gearbox. It is also beneficial for production because it allows for more interchangeable components. It can also be used in the oil and plastic industries. It has advantages over conventional gears because it runs quieter.
The helical gearbox is a type of gearbox that uses a helical cut on the teeth of the gears. It carries more surface contact than conventional gears, which increases the power carrying capacity. It is also more durable and quieter than conventional gears.
The helical gearbox is generally used in enclosed gear systems because it allows for higher tooth overlap and smoother performance. It also eliminates thrust forces. The helical gearbox can be made of two helical sections that are close together. It is common to use double helical gearboxes in enclosed gear systems. The gears can be ground and hardened.
The radial pitch of helical gears is about eight millimeters. In the helical gearbox, the radial pitch of the gears is the same as the pitch of the spur gears. Using the same tooth cutting tools, it is possible to make helical gears more economically.
The pitch of the helical gearbox will vary with the helix angle. Typically, the helix angle is between 15 and 30 degrees. The pitch will also change with the number of teeth in the spur gear. The pitch will increase when the number of teeth increases.
The pitch is also affected by the pressure angle of the tooth. The pressure angle affects the normal force and curvature radii. The length of the helical gear contact line decreases as the pressure angle increases. This can also be seen when considering contact on the tooth surface. The helix angle is also important when calculating the forces between the helical gears.
It is important to understand that helical gears generate axial forces within the gear-mesh. These forces need to be supported by bearings. They also generate heat. This heat is also detrimental to the efficiency of the gear. It can also cause power loss.
editor by CX 2023-10-25